Basic Control - Oki ML3410 Handbook

Basic Control

Basic Control
The basic control portion of the panel displays the status and controls the basic functions of the
printer.
There are five lights in this part of the panel. They reflect the printer status at any given time.
1. POWER light: The POWER light is lit whenever the printer is on.
2. ALARM light: This light is lit when an error condition exists such as a paper jam, cover open, the
printer is out of paper, and so on.
3. SELECT light: This light is lit when the printer is ready to receive data. If the SELECT light is not
lit, the printer is deselected and can•t receive data. If the light flashes, there•s a problem with the
printer that requires service.
4. PAPER FEED lights: these lights indicate which paper path is active.
Your printer has two modes of operation: Print mode and Menu Select mode. You will notice that
there are functions printed above and below the basic control buttons.
The functions above the buttons are active during Print mode; those below the buttons are active during
Menu Select mode.
ML3410 ( 96-02-07 )