Handset Settings; Ringer Volume; Ring Tone; Key Tone - VTech IA6765 - V-Tech Cordless Dual Handset User Manual

Handset settings

Ringer volume

• From the idle (off) mode, press SEL then
is shown
• Press SEL The current ringer volume will be shown:
• Press and or enter a digit (0 through 6) to the desired ringer volume
The current ring tone will play and the volume bar is increased or decreased
each time the setting is adjusted At the lowest setting the display will
show:
-OR-
• From idle (off) mode, press +/- volume control keys on the side of handset
will directly go to the RINGER VOLUME menu
• Press and to the desired ringer volume Ringer volume will be
adjusted

Ring tone

• From the idle (off) mode, press SEL then
displayed
• Press SEL You can then use
sample the ring tone
• Press SEL to confirm.

Key tone

• From the idle (off) mode, press SEL then
• Press SEL The current setting will be shown Press
ON or OFF When set to ON, the handset will emit a beep whenever a key
is pressed
• When the desired option is shown, press SEL
Handset name (preset to VTECH)
• You can give each handset its own unique name (such as kitchen or
office). The name is shown in the first line when the handset is idle.
The name can be a up to 16 characters in length
or until RINGER VOLUME
or until RINGER TONE is
or or enter a digit (0 through 9) to
to KEY TONE
or
or to scroll to
www vtechphones com

HANDSET NAME

VTECH_
• The handset will
not ring when a
call comes in if
ringer volume is in
the lowest setting
25