Front Drive Bezels - Compaq dc7700 - Convertible Minitower PC Service & Reference Manual
Business pc 1st edition
Hide thumbs
Also See for dc7700 - Convertible Minitower PC:
- Quickspecs (49 pages) ,
- Quick setup & getting started (30 pages) ,
- Firmware update (22 pages)
Table of Contents
Advertisement
Removal and Replacement Procedures— Small Form Factor (SFF) Chassis
7.6
Front Drive Bezels
1. Prepare the computer for disassembly
2. Remove the computer cover
3. Remove the drive bezel by pushing the top tab on the right side of the larger front bezel as
shown 1 and rotating the drive bezel away from the larger front bezel 2.
✎
The drive bezel will vary depending on the computer configuration.
4. Install a bezel or a bezel blank by pushing the bezel into place.
7–8
(Section
7.1).
(Section
7.5).
433612-001
Service Reference Guide, dc7700
Advertisement
Table of Contents
