Replacing The Front Bezel - Compaq CQ5110F - Presario - 3 GB RAM Upgrade And Service Manual

6 Pull each of the three side tabs that secure the front
bezel to the computer, to release the front bezel.
7 Swing the front bezel out to remove from the
computer.
4

Replacing the Front Bezel

IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
1 To replace the front bezel, align the left side of the
bezel and swing the front bezel toward the computer
to close it.
2 The side panel has several tabs on its top, bottom,
and leading edges.
570984-001 — Removing and Replacing the Front Bezel