Compaq CQ5110F - Presario - 3 GB RAM Upgrade And Service Manual page 30

Replacing an Add-In Card
IMPORTANT: The new (replacement) part may not look
the same as the original part, due to different
manufacturers or models. Hewlett-Packard always
provides quality parts that meet or exceed your original
computer specifications.
1 Replace any cables previously removed from
the card.
2 Align the edge of the card with the slot on the
computer.
6
3 If you are replacing a graphics card, verify that the
latch in the computer snaps back into place.
4 Press straight down until the card is fully seated in the
card slot.
537493-001 — Removing and Replacing an Add-In Card