Compaq CQ5110F - Presario - 3 GB RAM Upgrade And Service Manual page 18

Upgrading and servicing guide
Hide thumbs Also See for CQ5110F - Presario - 3 GB RAM:
Table of Contents

Advertisement

Removing and Replacing a Hard Disk Drive
25–30 MINUTES
Before You Begin
Observe the following requirements before removing and
replacing a hard disk drive.
IMPORTANT: A hard disk drive is extremely sensitive to
shock impact. Do not bang or drop it. Do not touch the
circuit board. Static electricity can damage the drive.
Tools Needed:
Flathead screwdriver
Phillips screwdriver
Flathead screwdrivers
A flathead screwdriver can be used with the
screw seen in the following illustration.
CAUTION: Static electricity can damage
the electronic components inside the
computer. Discharge static electricity by
touching the metal cage of the computer
before touching any internal parts or
electronic components.
2
IMPORTANT: Computer features may vary by model.
537492-001 — Removing and Replacing a Hard Disk Drive
WARNING:
Never open the cover with
the power cord attached or
power applied. You may
damage your computer or
be injured from the
spinning fan blades.
Avoid touching sharp edges
inside the computer.
Before you open the
computer, allow the
internal system components
to cool before touching.

Advertisement

Table of Contents
loading

Table of Contents