Design Accelerator Components - Autodesk 466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010 Getting Started

When you create a component in-place, you can do one of the following:
Sketch on one of the assembly origin planes.
Click in empty space to set the sketch plane to the current camera plane.
Constrain a sketch to the face of an existing component.
When you create a subassembly in place, you define an empty group of
components. The new subassembly automatically becomes the active assembly,
and you can start to populate it with placed and in-place components. When
you reactivate the parent assembly, the subassembly is treated as a single unit
in the parent assembly.
Optionally, you can select components at the same assembly level in the
browser, right-click, and then select Component
into a new subassembly. You are asked to specify a new file name, template,
location, and default bill of materials structure. You can then move
components between assembly levels by dragging components in the browser.
Subassemblies can be nested many layers deep in a large assembly. By planning
and building subassemblies, you can efficiently manage the construction of
large assemblies. You can create subassemblies that match the intended
manufacturing scheme to facilitate the creation of your assembly
documentation.
For more information
Help
Tutorial
Skill Builders

Design Accelerator Components

Design Accelerator provides a set of generators and calculators to create
mechanically correct components automatically from simple or detailed
mechanical attributes you enter.
34 | Chapter 2 Create Digital Prototypes
Location
Search: Top-down, bottom-up, middle-out design"
Design Assemblies and Constraints
Assemblies
Demote to place them