Autodesk 466B1-05A761-1304 - AutoCAD Inventor Simulation Suite 2010 Getting Started page 26

The following features are dependent on a sketch you create:
Extrude
Adds depth to a sketch profile along
a straight path.
Can create a body.
Revolve
Projects a sketch profile around an ax-
is.
The axis and the profile must be co-
planar.
Can create a body.
Loft
Constructs features with two or more
profiles.
.
Transitions the model from one shape
to the next.
Aligns the profiles to one or more
paths.
Can create a body.
20 | Chapter 2 Create Digital Prototypes