Navigation Page - Eagle IntelliMap 500C Installation And Operation Instructions Manual

The Satellite Status Page has its own menu, which is used for setting
various options. (Options and setup are discussed in Sec. 5). To access
the Satellite Status Page Menu, from the Status Page, press

Navigation Page

This screen has a compass rose that not only shows your direction of
travel, but also the direction to a recalled waypoint. To get to the Navi-
gation Page: Press
The navigation screen looks like the one below when you're not navigat-
ing to a waypoint or following a route or trail. Your position is shown by
an arrow in the center of the screen. Your trail history, or path you've
just taken, is depicted by the line extending from the arrow. The arrow
pointing down at the top of the compass rose indicates the current track
(direction of travel) you are taking.
Track or compass heading indicator, showing direction of travel
Trail line
Navigation
information
displays in
customizable
data boxes
Navigation Page, recording a trail, traveling southwest. Page looks
like this when the unit is not navigating to a waypoint, following a
When navigating to a waypoint, the Navigation screen looks like the
following figure. Your ground speed, track, distance and bearing to
waypoint, and course are all shown digitally on this screen.
NOTE:
Remember, when the Speed, Track and Position information dis-
plays are flashing, satellite lock has not been achieved and no posi-
tion fix has been determined. A question mark will also flash on the
present position arrow in the center of the compass rose.
Speed (ground speed) is the velocity you are making over the ground. (If
you wish, you can customize the Speed data box to display Closing
|→ or ← to
PAGES
route, or backtracking a trail.
|
N EXIT
AVIGATION
28
MENU
.
Compass
rose
Present
position
arrow
.