Selecting A Waypoint; Set A Waypoint By Average Position - Eagle IntelliMap 480 Installation And Operation Instructions Manual

2. Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Press
| |
EXIT EXIT EXIT
Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT
|
W ENT
AYPOINT
2. Use arrow keys to select desired symbol and press
the previous page, press
Waypoint Position
To edit waypoint position:
1. Press
WPT
|
W ENT
AYPOINT
2. Latitude: press → to
character, then press → to the next character and repeat until the lati-
tude is correct. Press
3. Longitude: press ↓ to
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
4. When latitude and longitude are correct, return to the previous page:
press |
EXIT EXIT

Selecting a Waypoint

To select a waypoint on the map (for navigating to, for editing, etc.,) use
the arrow keys and center the cursor over the waypoint. a highlighted
halo will appear around the waypoint.

Set a Waypoint by Average Position

This feature sets a waypoint at the current position after taking several
position readings and averaging them. This boosts waypoint position
accuracy by helping to eliminate errors caused by atmospheric condi-
tions and other factors.
1. Press |→ to
WPT
2. Press ↓ or ↑ to
3. Wait while the unit takes points to average for the position. (The greater
the number of points, the greater the accuracy.) When the desired number
of points accumulates, press
| to return to the previous page display.
EXIT
| | |
ENT ENT ENT
|↓ to
C S
HOOSE
EXIT
| | |
ENT ENT ENT
.
L
ATITUDE
.
EXIT
L
ONGITUDE
EXIT
| | .
EXIT EXIT
S
UBCATEGORY
A P
VERAGE OSITION
|↓ to waypoint name|
| .
ENT
YMBOL
| | |
EXIT EXIT
|↓ to waypoint name|
. Press ↑ or ↓ to change the first
|
ENT
. Press ↑ or ↓ to change the first
|
ENT
.
column|↓ to
|press → to
|
ENT
to create and save the waypoint.
ENT
62
ENT
.
EXIT
| .
N ENT
EW
C
REATE
then
ENT
|↓ to
ENT E
DIT
. To return to
|↓ to
ENT E
DIT
| .
ENT