Eagle FishElite 642c Installation And Operation Instructions Manual page 123

1. Insert the MMC into your unit. Press
| |↓ to
S ENT
ETUP
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must insert a card
into the unit to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press → to
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ ↓ to change the first character, then press → to the next char-
acter and repeat until the name is correct. Then press
| .
D ENT
ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press .
EXIT
These figures (from left to right) show the menu sequence for naming
and saving a GPS Data File from the unit's memory to an MMC.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
tion box, use ↓ ↑ to highlight the file, then press
lection. Next, press ↓ to
tion message when the data transfer is finished. To return to the main
page display, press
T M D
RANSFER Y ATA
S D
AVE ATA
L D
OAD
repeatedly.
EXIT
| .
ENT
| . If you want to rename the file (as
ENT
to activate the selection box.
ENT
| . The unit will display a comple-
ENT
ATA
115
| |↓ to
MENU MENU
ENT
ENT
to activate the selec-
ENT
to accept the se-
ENT
S
YSTEM
(for .)
S
AVE
| .
L ENT
OAD
|↓ to
S
AVE