Table of Contents
Advertisement
vessel enters water that is more shallow than the alarm's setting. The
deep alarm sounds a tone your vessel enters water that is deeper than
the alarm's setting.
Shallow Alarm
To set the shallow alarm depth, repeatedly press
until
MENU
S
HALLOW
appears.
A
LARM
Shallow Alarm menu (left). Shallow Alarm Value Dialog box (right).
Press
to
. The Shallow Alarm Value dialog box will appear.
↓
S
V
ET
ALUE
Use ↑ ↓ to enter the first number in the dialog box, then press
MENU
to move to the next digit. Repeat those steps until the desired
DOWN
depth has been entered in the dialog box. To move the cursor back to
any of the previously entered numbers, press
. Press
to
MENU UP
PWR
return to the Shallow Alarm menu. Use
to select
, which will turn
↑
O
N
on the alarm, then press
to clear the menu. When your vessel en-
PWR
ters water more shallow than the alarm's setting, an alarm will sound
and a message will appear on the screen.
If the alarm goes off, press
to shut it off. It will remain silent until
PWR
it is triggered again.
48
Hide quick links:
Advertisement
Table of Contents
