Alliance Laundry Systems 100 Installation Manual
  1. Manuals
  2. Brands
  3. Alliance Laundry Systems Manuals
  4. Washer
  5. 100
  6. Installation manual
Alliance Laundry Systems 100 Installation Manual

Alliance Laundry Systems 100 Installation Manual

Cabinet freestanding
Hide thumbs Also See for 100:
Table of Contents

Advertisement

Quick Links

See also: Operation and Maintenance
Washer-Extractors
Cabinet Freestanding
Refer to Page 6 for Model Identification
CFD15C
33, 40, 55 and 75 Models
CFD19C
CFD19C
18, 25 and 35 Models
CFD20C
CFD20C
100, 135, 165 and 200 Models
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)
Part No. 9001000R13
www.comlaundry.com
July 2010

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 100 and is the answer not in the manual?

Questions and answers

Related Manuals for Alliance Laundry Systems 100

Summary of Contents for Alliance Laundry Systems 100

  • Page 1 33, 40, 55 and 75 Models CFD19C CFD19C 18, 25 and 35 Models CFD20C CFD20C 100, 135, 165 and 200 Models Keep These Instructions for Future Reference. (If this machine changes ownership, this manual must accompany machine.) Part No. 9001000R13 www.comlaundry.com July 2010...

  • Page 3: Table Of Contents

    All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. 9001000 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information... Explanation of Safety Messages...

  • Page 4: Safety Information

    NOTE: The word “NOTE” is used to communicate installation, operation, maintenance or servicing information that is important but not hazard related. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety Information Important Safety Instructions To reduce the risk of fire, electric shock,...
  • Page 5 If this occurs, have washer checked by a qualified service person. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 20. If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

  • Page 6: Safety Decals

    © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Be careful around the open door, particularly when loading from a level below the door. Impact with door edges can cause personal injury.

  • Page 7: Operator Safety

    Excessively high water level is evident. c. Machine is not connected to a properly grounded circuit. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Do not bypass any safety devices in the machine. Never operate the machine with a bypassed or disconnected balance system.

  • Page 8: Introduction

    SX25PVQM7 HX25PVXM6 SX25PVXM6 HX25PVXM7 SX25PVXM7 HX35PVQM6 SX35PVQM6 HX35PVQM7 SX35PVQM7 HX35PVXM6 SX35PVXM6 HX35PVXM7 SX35PVXM7 SX35PVNM7 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Introduction UX18PVNA6 HX18PVQU6 UX18PVNA7 HX18PVXU6 UX18PVPA6 UX18PVPA7 UX18PVQA6 UX18PVQA7 UX18PVQM6 UX18PVQM7 UX18PVXA6 UX18PVXA7 UX18PVXM6...
  • Page 9 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 continued HX55PVNU6 SX55PVNU6 HX55PVNU7 SX55PVNU7 HX55PVQU6 SX55PVPU6 HX55PVQU7 SX55PVPU7 HX55PVXU6 SX55PVQU6 HX55PVXU7 SX55PVQU7 SX55PVXU6 SX55PVXU7 HX75PVNU6 SX75PVNU6 HX75PVNU7 SX75PVNU7 HX75PVPU7 SX75PVPU7 HX75PVQU6 SX75PVQU6 HX75PVQU7 SX75PVQU7 HX100PVNU6 SX100PVNU6...

  • Page 10: Nameplate Location

    Alliance Laundry Systems at (920) 748-3950 for the name and address of the nearest authorized parts distributor. Customer Service For technical assistance, call (920) 748-3121. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000...
  • Page 11 Electrical Characteristics Design Series Option Identification (varies from machine to machine) 0001 * Denotes Brand 50 60 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Model Number Familiarization Guide Sample Model Number: *X55PVXM60001 X55PVXM60001 2/3+PE...

  • Page 12: Specifications And Dimensions

    † For Models with A or M in the 8th position in the model number (e.g. *X18PVXA6) †† For Models with U in the 8th position in the model number (e.g *X18PVXU6) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT General Specifications 26 in.
  • Page 13 Steam inlet connection size Number of steam inlets Electrical Heating (Optional) Total electrical heating capacity Electrical heating elements Electrical heat element size © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 General Specifications 1 HP 1 HP (0.75 kW) (0.75 kW)
  • Page 14 Door Opening Information Door opening size 15.6 in. (395 mm) Height of door bottom above floor (559 mm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT General Specifications 41.8 in. 47.3 in. (1060 mm) (1200 mm) 61.4 in.
  • Page 15 Steam inlet connection size Number of steam inlets Electrical Heating (Optional) Total electrical heating capacity Electrical heating elements Electrical heat element size © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 General Specifications 4 HP 5.4 HP 7.4 HP...
  • Page 16 Fill and Supply Ventilation Cold Water Inlet (Required) Hot Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 11 in. (279 mm) 19.13 in. (486 mm) 26 in.
  • Page 17 Fill and Supply Ventilation Cold Water Inlet (Required) External Liquid Supply Inlets Hot Water Inlet (Required) Ventilation Tub Main Switch © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 1.3 in. 1.18 in. (33 mm) (30 mm) 2.56 in.
  • Page 18 Fill and Supply Ventilation External Liquid Supply Inlets Cold Water Inlet (Required) Cold Water Inlet (Required) Hot Water Inlet (Required) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1.97 in. 1.34 in. (50 mm) (34 mm)
  • Page 19 35 Pound Capacity Models with U in the 8 Fill and Supply Ventilation Cold Water Inlet (Required) Hot Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 CFD531N 12.9 in. CFD531N (328 mm) 10.4 in.
  • Page 20 Fill and Supply Ventilation Hot Water Inlet (Required) Cold Water Inlet (Required) Main Switch Ventilation Tub Electrical Power Input © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1.34 in. (34 mm) 1.44 in. 2.6 in. (36.5 mm)
  • Page 21 Fill and Supply Ventilation External Liquid Supply Inlets Cold Water Inlet (Required) Cold Water Inlet (Required) Hot Water Inlet (Required) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 1.97 in. 1.34 in. (50 mm) (34 mm)
  • Page 22 Cold Water Inlet (Required) Hot Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser External Liquid Supply Inlets © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 59 in. (1499 mm) 35.43 in. (900 mm) CFD509N CFD509N 13.6 in.
  • Page 23 Fill and Supply Ventilation Cold Water Inlet (Required) Hot Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser External Liquid Supply Inlets © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 60.3 in. (1532 mm) CFD510N 19.2 in.
  • Page 24 Cold Water Inlet (Required) Hot Water Inlet (Required) Cold Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser External Liquid Supply Inlets © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT CFD511N CFD511N 12 in. (305 mm) 9.3 in.
  • Page 25 Cold Water Inlet (Required) Hot Water Inlet (Required) Cold Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser External Liquid Supply Inlets © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 51.2 in. CFD511N CFD511N 14.25 in.
  • Page 26 Hot Water Inlet (Required) Cold Water Inlet (Required) Cold Water Inlet (Required) Flushing Supply Dispenser External Liquid Supply Inlets © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 1.73 in. (44 mm) 10.71 in. (272 mm) 3.19 in.

  • Page 27: Installation

    (side) Minimum front 16.5 in. 16.5 in. clearance (door (419 mm) (419 mm) swing) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Installation Recommended Minimum Clearances 24 in. 24 in. 24 in. 24 in.

  • Page 28: Machine Foundation

    700/16 750/16 1200/16 1200/16 1200/16 1700/15 2000/15 2960/13 3900/13 4960/13 6100/13 Load, (N/Hz) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT The washer-extractor must be placed on a smooth level surface so that the entire base of the machine is supported and rests on the mounting surface.

  • Page 29: Mechanical Installation

    23.23 in. (590 mm) 22.59 in. (650 mm) 1.81 in. (30 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 26 in. (660 mm) 23.38 in. (594 mm) 20.87 in.
  • Page 30 (782 mm) 27.17 in. (690 mm) 1.81 in. (30 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 26 in. (660 mm) 23.38 in. (594 mm) 20.87 in. (530 mm)
  • Page 31 .87 in. (22 mm) 1.97 in. (50 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 26.77 in. (680 mm) 30.71 in. (780 mm) 33 MODEL Figure 16 Installation 1.34 in.
  • Page 32 66 mm) (66 mm) 33 in. (838 mm) 30.12 in. (765 mm) 1.44 in. CFD43N (36.5 mm) 35 MODEL CFD43N Figure 17 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000...
  • Page 33 .87 in. (22 mm) 1.97 in. (50 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 26.77 in. (680 mm) 30.71 in. (780 mm) 40 MODEL Figure 18 Installation 1.34 in.
  • Page 34 (830 mm) 1.97 in. (50 mm) 3.15 in. (80 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 35.35 in. (898 mm) 29.13 in. (740 mm) 55 MODEL Figure 19 36.61 in.
  • Page 35 2.36 in. (60 mm) 34.25 in. (870 mm) 3.74 in. 3.74 in. (95 mm) (95 mm) CFD46N 75 MODEL CFD46N Figure 20 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000...
  • Page 36 (1010 mm) 1.57 in. (40 mm) 3.15 in. (80 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 47.24 in. (1200 mm) 40.94 in. (1040 mm) 100 MODEL Figure 21 42.91 in.
  • Page 37 1.67 in. (42.5 mm) 40.94 in. (1040 mm) 3.15 in. 3.15 in. (80 mm) (80 mm) CFD47N 135 MODEL CFD47N Figure 22 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000...
  • Page 38 1.3 in. (33 mm) 44.9 in. (1140 mm) 3.15 in. 3.15 in. (80 mm) (80 mm) CFD47N 165 POUND CFD47N Figure 23 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000...
  • Page 39 44.8 in. 3.19 in. 3.19 in. (1138 mm) (81 mm) (81 mm) 51.18 in. (1300 mm) CFD536N 200 POUND CFD536N Figure 24 IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000...
  • Page 40 (560 mm) 2.17 in. (55 mm) 3.43 in. (87 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 26 in. (660 mm) 19.13 in. (486 mm) 18 MODEL Figure 25 26.38 in.
  • Page 41 25.98 in. (660 mm) 2.17 in. (55 mm) 3.43 in. (87 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 26 in. (660 mm) 19.13 in. (486 mm) 25 MODEL...
  • Page 42 (770 mm) 1.77 in. (45 mm) 2.78 in. (71 mm) IMPORTANT: Drawing is not to scale. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 30.8 in. (782 mm) 25.16 in. (639 mm) 35 MODEL Figure 27 33.85 in.

  • Page 43: Mounting Bolt Installation (If Required)

    (For the 18, 25, and 35 models, the diameter of the bolt must be minimum 1/2-13 or 12 mm; for the 33, 40, 55, 75, 100, 135, 165 and 200 models, the diameter of the bolt must be minimum 5/8-11 or 16 mm.)

  • Page 44: Removing The Transport Brackets

    Figure 30 for 33 and 40 models; refer to Figure 31 for 55 and 75 models [depending on model number]; refer to Figure 32 for 100, 135, 165 and 200 models) to eliminate every possible movement of the tub. After the machine has been placed level, take off the service panels and the back panel to remove these transport brackets.
  • Page 45 33 AND 40 MODELS Transport Brackets Figure 30 55 AND 75 MODELS Transport Brackets Figure 31 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 FRONT REAR CFD543N FRONT REAR CFS487N CFS487N Installation FRONT REAR CFS488N...

  • Page 46: Drain Connection

    Strainer Waste Line Figure 33 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT A flexible connection must be made to a vented or air gap drain system to prevent an air lock and to prevent siphoning. If proper drain size is not available or practical, a surge tank is required.
  • Page 47 (76.2 mm) (102 mm) 3 in. (76.2 mm) (102 mm) 3 in. (76.2 mm) (102 mm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Drain Information 3 in. 2 in. 2 in. (76.2 (51 mm) (50 mm) 21.13...

  • Page 48: Water Connection

    (20 l/ min) min) min) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT To connect water service to machine with rubber hoses, use the following procedure: 1. Before installing hoses, flush the water system for at least two minutes.

  • Page 49: Electrical Installation

    Use wire sizes indicated in Table 6 for runs up to W360 50 feet. Use next larger size for runs of 50 to 100 feet. Use two sizes larger for runs greater than 100 feet. For personal safety and proper operation, the washer- extractor must be grounded in accordance with state and local codes.
  • Page 50 440-480 50/60 380-415 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Electrical Specifications Standard 3+PE 3+N+PE Not available 3+PE Not available 2/3+PE 3+PE 3+N+PE Not available 3+PE...
  • Page 51 440-480 50/60 380-415 50/60 200-240 50/60 440-480 50/60 380-415 50/60 200-240 50/60 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Table 6 (continued) Electrical Specifications Standard 3+PE 3+N+PE 3+PE 3+PE 3+N+PE 3+PE Table 6 Installation...

  • Page 52: Electrical Connection

    Failure to follow these instructions could damage the machine and void the warranty. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT CONNECTION OF THE LIQUID SUPPLY HOSES A connection has been placed at the back of the machine.

  • Page 53: Steam Requirements (Steam Heat Option Only)

    Steam inlet connection, in (mm) Number of steam inlets Recommended pressure, psi (bar) Maximum pressure, psi (bar) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 For washer-extractors equipped with optional steam heat, install piping in accordance with approved commercial steam practices.

  • Page 54: Supply Programming Table

    The voltage applied must be supplied with the jumper configurations. Refer to Figure 36. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Primary 220 Volt Remote Liquid Supply Connection IMPORTANT: When programming a supply step, supplies 1, 2 and 3 DO NOT control the relays shown on Figure 36.
  • Page 55 3 will control terminals 5 and 6; etc. IMPORTANT: The WE-8 must be programmed for supply 4-9 to energize the supply relays 1-6 respectively. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 Primary 220 Volt Remote Liquid Supply VAC)

  • Page 56: Out-Of-Balance Switch

    1/3 from the bottom of the tilt window (when machine drum is empty). © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Automatic Lubricator Only for 75-200 Models CFS501N...

  • Page 57: Control Function Test

    AC Drive Connections © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 9001000 b. Close the door without locking it and attempt to start the washer. The washer should not start with the door unlocked.

This manual is also suitable for:

135165182003335 ... Show all

Table of Contents

Save PDF