Epson AcuLaser C3900N User Manual page 49

Items
STARTUP DO STARTUP PAGE
OPTIONS
AUTO CONTINUE
HOLD JOB TIMEOUT
ENERGY SAVER TIME
MENU TIMEOUT
LCD CONTRAST
AcuLaser C3900 Series
Settings (default in bold)/Description
ON/OFF
Select whether or not a startup page is printed when
the printer is turned on.
ON/OFF
Select whether or not printing continues if the size or
type of media in the selected tray is different from the
size or type of media for the print job.
If AUTO CONTINUE is set to ON, printing automatically
continues after about 10 seconds under the following
conditions. At this time, printing will be performed
even if the media size is different.
No media: PAPER EMPTY/TRAY EMPTY ("Error
Messages (Operator Call)" on page 142)
Different media size/type: PAPER ERROR/TRAY X
PAPER ERR ("Error Messages (Operator Call)" on page
142)
DISABLE/1 hour/4 hours/1 day/1 week
Specify the length of time until print jobs saved on the
hard disk are deleted. If DISABLE is selected, print jobs
are not deleted at a specific time.
5 minutes/6 minutes/7 minutes/8 minutes/9
minutes/10 minutes/11 minutes/12 minutes/13
minutes/14 minutes/15 minutes/30 minutes/1 hour/
3 hours
Specify the length of time until the machine enters
Energy Saver mode.
OFF/1 minute/2 minutes
Specify the length of time until the status screen is
displayed when no operation is performed while a
menu or help screen is displayed in the message
window. If OFF is selected, no timeout occurs.
-3/-2/-1/0/+1/+2/+3
Adjust the contrast of the message window.
The darkest level setting is -3 and the brightest level
setting is +3.
Printer Control Panel and Configuration Menu
User's Guide
49