An Ink Error Is Indicated After You Replace The Cartridge - Epson WorkForce WF-2010W User Manual

User's Guide
❏ Users of Windows can clear any stalled print jobs from the Windows Spooler.
"Canceling printing" on page 23
&
❏ Uninstall the printer driver, then reinstall it.
"Uninstalling Your Software" on page 56
&

An ink error is indicated after you replace the cartridge

A
Open the printer cover.
B
Make sure the ink cartridge holder is at the ink cartridge replacement position.
Note:
If the ink cartridge holder is at the far right position, press the + button. The ink cartridge holder moves to the ink
cartridge check position. The cartridge that is expended or low is indicated by the
press the + button again. The ink cartridge holder moves to the ink cartridge replacement position.
C
Remove and reinsert the ink cartridge and then continue with the ink cartridge installation. Make sure the top
surface of the ink cartridges align.
D
Close the printer cover, and press the + button in the control panel.
Troubleshooting for Printing
71
mark on this product. Then