Using The Head Cleaning Utility For Mac Os X; Using The Product Buttons - Epson WorkForce WF-2010W User Manual

User's Guide
B
Right-click the product icon on the taskbar, then select Head Cleaning.
If the product icon does not appear, refer to the following section to add the icon.
"From the shortcut icon on the taskbar" on page 19
&
C
Follow the on-screen instructions.

Using the Head Cleaning utility for Mac OS X

Follow the steps below to clean the print head using the Head Cleaning utility.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Access the Epson Printer Utility 4.
"Accessing the printer driver for Mac OS X" on page 19
&
C
Click the Head Cleaning icon.
D
Follow the on-screen instructions.

Using the product buttons

Follow the steps below to clean the print head using the product buttons.
A
Make sure that no warnings or errors are indicated in the control panel.
B
Hold down the + button for three seconds until the P light flashes.
The product starts cleaning the print head.
c
Important:
Never turn off the product while the P light is flashing. Doing so may damage the product.
Maintaining Your Product and Software
49