Adjusting Basic Camera Functions
Electronic Level Calibration
Calibrate the electronic level if it seems ineffective in helping you level the
camera.
Resetting the Electronic Level
Restore the electronic level to its original state as follows. Note that this is
not possible unless you have calibrated the electronic level.
228
1
Make sure the camera is level.
z
z
Place the camera on a flat surface, such
as a table.
2
Access the [Electronic Level]
screen.
z
z
Choose [Electronic Level], and then press
the <m> button.
3
Calibrate the electronic level.
z
z
To adjust left/right tilt, choose [Horizontal
Roll Calibration], and to adjust forward/
backward tilt, choose [Vertical Pitch
Calibration], followed by the <m> button.
A confirmation message is displayed.
z
z
Choose [OK], and then press the <m>
button.
z
z
Choose [Electronic Level], and then press
the <m> button.
z
z
Choose [Reset], and then press the
<m> button.
X
X
Once the electronic level has been reset,
the menu screen is displayed again.