Canon PowerShot G15 User Manual page 251

• Settings for the built-in flash cannot be configured while a Speedlite EX
series flash is attached, because that setting screen is no longer accessible.
• You can also access the setting screen by pressing the <r> button for at
least one second.
• Flash settings in [
<G> mode.
• 600EX-RT/580EX II only: [Flash Control] is not available if the external flash
has been set up for stroboscopic flash.
• 320EX only: Auto LED lighting is only available in low-light movie recording
or in Movie mode. In this case, the [
3
Choose shooting mode <G>,
<M>, <B>, or <D>.
z z Flash settings can only be configured in
these modes. In other modes, the flash
is adjusted and fired automatically, as
needed.
4
Set the white balance to [h]
(= 1 34).
5
Configure the external flash.
z z Press the <n> button, choose [Flash
Control] on the [4] tab, and then press
the <m> button.
Options already set on the flash itself are
X X
displayed.
z z Press the <o><p> buttons or turn
the <7> dial to choose an item, and
then adjust the setting by pressing the
<q><r> buttons.
z z
Available settings vary depending on the
shooting mode and the flash attached
(= 2 57).
] shooting mode can be configured just as they are in
] icon is shown.
Using Optional Accessories
251