Attaching To The Camera - Canon Wireless File Transmitter WFT-E2 II A Instruction Manual

Attaching to the Camera

Turn off the camera before attaching the transmitter.
Ensure the camera battery has sufficient charge. If the charge drops below 19%, you
cannot transfer captured images or back them up to external media.
Camera terminal cap
Removal
Turn off the camera.
Push the lever down, into the release position.
Loosen the tightening screw until it spins freely.
Pull the terminal out of the camera.
10
Remove the terminal cap from the
1
camera.
Unscrew the extension system terminal cap to
remove it.
Screw the terminal cap into the terminal cap
receptacle of the transmitter.
Move the lever into the release position.
2
Attach the transmitter.
3
Align the attachment pin with the WFT-E2 II/E2 IIA
mounting hole on the camera.
Push the terminal firmly into the camera.
As you push the terminal into the camera, turn the
tightening screw until it stops rotating to attach the
transmitter securely.
Move the lever into the locked position.
4
The transmitter is now attached to the camera.
The transmitter will be powered by the camera.