Canon Wireless File Transmitter WFT-E2 II A Instruction Manual page 54

Saving and Loading Settings
Loading Settings
Load settings files stored on a memory card as follows. Also use this procedure when loading
settings files created on a computer.
Make sure the settings file is saved in the folder shown when the memory card is opened (that
is, the root directory).
54
Select [Save].
6
The settings are now saved as a file on the
memory card.
The file name is determined automatically by the
camera: WFTNPF, followed by a number (01 to
99) and the extension NIF. You can rename the file
as desired by selecting [Change file name].
Select [Load settings].
1
Select the settings file.
2
Select a settings file that matches your network
environment.
Load the settings file.
3
Information from the settings file is loaded into the
selected settings number.