Canon Wireless File Transmitter WFT-E2 II A Instruction Manual page 70

Wireless file transmitter for use with eos-1d mark iii or eos-1ds mark ii

Hide thumbs Also See for Wireless File Transmitter WFT-E2 II A:

Table of Contents

Connecting GPS Devices

Unplugging GPS Devices from the USB Port

Before unplugging GPS devices from the USB port, always select [Disconnect] as shown in

step 5. Follow the instructions displayed to terminate the connection.

The connection will not be terminated if you simply turn off the camera and GPS device. If you

unplug GPS device while the connection is still active, plug the GPS device into the USB port

again and follow the preceding steps to terminate the connection.

Power Management

If you will not use a wireless or wired LAN at the

same time as the GPS device, set

[Communication mode] to [Disconnect]. The

camera battery drains faster under settings other

than [Disconnect] because power saving is

disabled.

Table of Contents