Attaching To The Camera - Canon WFT-E8A Instruction Manual

Attaching to the Camera

Set the camera's power switch to <2> before attaching the
transmitter.
The transmitter is powered by the camera. Ensure the camera
battery has sufficient charge. If the battery level drops to 19% or
less, you cannot transfer captured images.
Removing the transmitter
Set the camera's power switch to <2>.

Loosen the tightening screw until it spins freely.

Pull the terminal out of the camera.

Open the terminal cover on the
1
camera.
Pull out the system extension

terminal cover and rotate it toward the
front.
Attach the transmitter.
2
Align the transmitter terminal and

attachment pin with the
corresponding camera terminal and
hole.
Push the terminal firmly into the

camera.
As you push the terminal into the

camera with your left index finger,
turn the tightening screw until it stops
rotating to attach the transmitter
securely.
11