Attaching to the Camera
Set the camera's power switch to <
The transmitter is powered by the camera. Ensure the camera battery has sufficient
charge. If the battery level drops to 19% or less, you cannot transfer captured images.
1.
Open the terminal cover on the camera.
2.
Attach the transmitter.
Removing the transmitter
Set the camera's power switch to <
Loosen the tightening screw until the transmitter comes off.
Pull out the system extension terminal cover and rotate it toward the
front.
Insert the transmitter terminal and attachment pin in the corresponding
camera system extension terminal and attachment hole.
Push the underside of the transmitter into the camera and turn the
tightening screw in the direction of the arrow.
Turn the tightening screw until it stops rotating to securely attach the
transmitter.
> before attaching the transmitter.
>.
14