Scanning For Channels; Deleting Channels - Dynex DX-LCD37-09-2 User Manual

Using your TV

Scanning for channels

The first time you turn on your TV, you need to scan for channels
available in your area. Your TV skips any channel that does not have a
signal. Your TV stores the channel information in the channel list. When
you press CH+ or CH–, your TV tunes to the next or previous stored
channel.
You do not need to scan for channels again unless:
• You change the TV signal input source. For example, you change
from an antenna to cable TV.
• More channels become available.
• You move your TV to a different viewing area.
To scan for channels when the TV signal source is Antenna:
1 Make sure that you have selected the TV signal source. For more
information, see "Selecting the TV signal source" on page 14.
2 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
Select
3 Press or to select Channel, then press . The Channel
menu opens.
Picture
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select
4 Press or to highlight Auto Scan, then press
Start to Scan is highlighted.
5 Press or ENTER to start the scan. Your TV scans for analog and
digital channels and stores the channel information in the
channel list.
To scan for channels when the TV signal source is Cable:
1 Make sure that you have selected the TV signal source. For more
information, see "Selecting the TV signal source" on page 14.
2 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
Select
Time Setup Lock Channel
Standard
50
50
50
0
50
Cool
Move
Exit
MENU
Time Setup Lock Channel
Air
2-1
WGBH-SD
Good
:
Move
Exit
MENU
or ENTER.
Time Setup Lock Channel
Standard
50
50
50
0
50
Cool
Move
Exit
MENU
3 Press or to select Channel, then press . The Channel
menu opens.
Picture
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
Select
4 Press or to highlight Auto Scan, then press
Picture
Cable System
Start to Scan
Select
5 Press or to highlight Cable System, then press or to
select the type of cable system you have. You can select STD, IRC,
HRC, or AUTO. If you do not know the type of cable system, select
AUTO.
6 Press or to highlight Start to Scan, then press or ENTER
to start the scan. Your TV scans for analog and digital cable
channels and stores the channel information in the channel list.
Note: If you want to stop the scan, press MENU.

Deleting channels

You can delete a channel from the channel list so your TV skips the
channel when you press CH+ or CH–. You can still tune to the channel
using the number buttons.
To delete a channel:
1 Press MENU. The on-screen menu opens.
Picture
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Mode
Select
Time Setup Lock Channel
Air
2-1
WGBH-SD
Good
:
Move
Exit
MENU
or ENTER.
Time Setup Lock Channel
AUTO
Move
Exit
MENU
Time Setup Lock Channel
Standard
50
50
50
0
50
Cool
Move
Exit
MENU
15