Maintaining; Troubleshooting - Dynex DX-LCD37-09-2 User Manual

28
2 Press or to select Setup, then press . The Setup menu
opens.
Picture Audio
Menu Language
Transparency
Zoom Mode
Noise Reduction
Advanced
Closed Caption
Restore
Select
3 Press or to select Restore All, then press
4 Press MENU to return to the previous menu, or press EXIT to
close the menu.

Maintaining

Cleaning
• Clean your TV with a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth dampened with a weak detergent solution.
• Use an eyeglass cleaner to clean the screen.
• Never use alcohol, paint thinner, or benzine.
• Before using a chemically treated cloth, read the instructions that
came with the cloth.

Troubleshooting

Warning: Do not try to repair your TV yourself. Contact authorized service
personnel.
Remote control
Problem Solution
Remote control does not
work.
Time Setup Lock Channel
English
Off
Wide
Weak
Move
Exit
MENU
or ENTER.
• Replace the batteries. For more
information, see "Installing
remote control batteries" on
page 9.
• Make sure that the batteries are
inserted correctly. For more
information, see "Installing
remote control batteries" on
page 9.
• Make sure that the power cord is
plugged into a power outlet.
Video and audio
Problem Solution
No picture or sound (the • Make sure that the power cord is
screen is not lit).
• Press
• Try another channel. The problem
Dark, poor, or no picture • Select the correct picture mode.
(the screen is lit), but
sound is good.
• Adjust the brightness. For more
• Make sure that the antenna or
No color, picture is dark, • Adjust the color saturation. For
or color is not correct.
Only noise (snow) • Make sure that the antenna or
appears on the screen.
• Try another channel. The problem
Picture has dotted lines or • Adjust the antenna.
stripes. • Move your TV away from noise
Picture has double • Use a highly directional outdoor
images.
Good picture, no sound. • Increase the volume.
• Press MUTE to make sure that the
• Make sure that the audio mode is
Audio noise or static. • Move radio frequency
Maintaining
plugged into a power outlet.
(power) on your TV or the
remote control.
could be with the TV station.
For more information, see
"Adjusting the picture" on
page 16.
information, see "Adjusting the
picture" on page 16.
cable TV is connected correctly.
For more information, see
"Connecting an antenna, cable
TV, or satellite TV box" on page
10.
more information, see "Adjusting
the picture" on page 16.
cable TV is connected correctly.
For more information, see
"Connecting an antenna, cable
TV, or satellite TV box" on page
10.
could be with the TV station.
sources, such as cars, neon signs,
or hair dryers.
antenna or switch to cable or
satellite TV.
sound is not muted.
set to STEREO or MONO. For
more information, see "Selecting
the audio mode" on page 18.
communication equipment, such
as a cordless phone, away from
your TV.