Right Side Buttons; Back Jacks - Dynex DX-LCD37-09-2 User Manual

Features

Right side buttons

# Button Description
1 Press to go to the next or previous
CH /CH
channel in the channel list.
2 Press to increase or decrease the volume.
VOL /VOL
3 MENU Press to open the on-screen menu.
4 INPUT Press to select the video input. For more
information, see "Selecting the video
input source" on page 14.
5 Press to turn your TV on or off. When you
(power)
turn off your TV, it goes into standby
mode.

Back jacks

# Jack
1 AC POWER
2 Headphone
3 HDMI 1/HDMI 2
4 VGA PIC/AUDIO
5 COMPONENT IN1
COMPONENT IN 2
6 S-VIDEO/AV
INPUT
7 AV OUT
8 RF
9 RS-232
10 S/PDIF OUT
1
2
3
4
5
6
7
8
9
10
Description
Connect the power cord to this
jack.
Connect headphones to this jack.
Connect HDMI devices to these
jacks.
Connect a computer to these
jacks.
Connect component video
devices to these jacks.
Connect an S-Video or AV device
to one of these video jacks, then
connect the audio to the adjacent
audio jacks.
Connect a VCR for recording to
these jacks.
Connect an antenna or cable TV
to this jack.
For service only. Do not use.
Connect to a digital audio system.
7