System Panel Connector (10-1 Pin Panel) - Asus F1A55-M LE R2.0 User Manual

6. System panel connector (10-1 pin F_PANEL)
This connector supports several chassis-mounted functions.
F1A55-M LE R2.0 System panel connector
• System power LED (2-pin PLED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin IDE_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The IDE LED lights up or flashes when data is read from or written to
the HDD.
• ATX power button/soft-off button (2-pin PWRSW)
This 2-pin connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
7. LPT connector (26-1 pin LPT)
The LPT (Line Printing Terminal) connector supports devices such as a printer. LPT
standardizes as IEEE 1284, which is the parallel port interface on IBM PC-compatible
computers.
F1A55-M LE R2.0 Parallel Port Connector
1-30
PWR LED
PIN 1
F1A55-M LE R2.0
HD_LED
F1A55-M LE R2.0
F_PANEL
PWR BTN
RESET
LPT
Chapter 1: Product introduction