System Panel Connector (10-1 Pin F_Panel); Tpm Connector - Asus H110I-PLUS D3 User Manual

Hide thumbs Also See for H110I-PLUS D3:
Table of Contents

Advertisement

9.

System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.
H110I-PLUS D3 System panel connector
System power LED (2-pin +PWR_LED-)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
Hard disk drive activity LED (2-pin +HDD_LED-)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HD LED lights up or flashes when data is read from or written to
the HDD.
ATX power button/soft-off button (2-pin PWRBTN)
This connector is for the system power button.
Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
10.
TPM connector (14-1 pin TPM)
This connector supports a Trusted Platform Module (TPM) system, which can securely
store keys, digital certificates, passwords, and data. A TPM system also helps enhance
network security, protects digital identities, and ensures platform integrity.
H110I-PLUS D3 TPM connector
The TPM module is purchased separately.
1-18
F_PANEL
(NC)
HWRST#
GND
Ground
PWR
PWR_LED-
HDD_LED-
PWR_LED+
HDD_LED+
PIN 1
TPM
PIN 1
Chapter 1: Product introduction

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents