System Panel Connector (10-1 Pin F_Panel) - Asus E3M-PLUS V5 User Manual

9.

System panel connector (10-1 pin F_PANEL)

This connector supports several chassis-mounted functions.
E3M-PLUS V5
E3M-PLUS V5 System panel connector
• System power LED (2-pin PWR_LED)
This 2-pin connector is for the system power LED. Connect the chassis power LED
cable to this connector. The system power LED lights up when you turn on the system
power, and blinks when the system is in sleep mode.
• Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED. Connect the HDD Activity LED cable
to this connector. The HDD LED lights up or flashes when data is read from or written
to the HDD.
• ATX power button/soft-off button (2-pin PWR_BTN)
This connector is for the system power button.
• Reset button (2-pin RESET)
This 2-pin connector is for the chassis-mounted reset button for system reboot without
turning off the system power.
10. USB 3.0 connector (20-1 pin USB3_12)
This connector allows you to connect a USB 3.0 module for additional USB 3.0 front
or rear panel ports. With an installed USB 3.0 module, you can enjoy all the benefits of
USB 3.0 including faster data transfer speeds of up to 5Gbps, faster charging time for
USB-chargeable devices, optimized power efficiency and backward compatibility with
USB 2.0.
E3M-PLUS V5
E3M-PLUS V5 USB3.0 Front panel connector
The USB 3.0 module is purchased separately.
ASUS E3M-PLUS V5
F_PANEL
+PWR LED PWR BTN
PIN 1
+HDD_LED RESET
USB3_12
PIN 1
1-17