Table of Contents
Advertisement
Operating
instructions
Suitable options will automatically
be indicated
when the cycle is selected.
To add options,
press the corresponding options
buttons to illuminate the selections desired. To de-
lete options,
press the options buttons again and
the indicator lights will turn off.
Not all options are available with every cycle. The
indicator will not light if the option is not available
with that cycle.
All options selected for the cycle, except sanitize,
will be remembered and recalled each time that
cycle is selected in the future. To prevent uninten-
tional and accidental exposure of delicate material
to sanitize heat, the sanitize option will not be
remembered and must be reselected each time.
Temperature
Dryness
C) high
@ medium/high
O max
O medium
@ normal
4) low
_ less
O air
O damp
Options
i_
damp
alert
extended
tumble
wrinkle
release
delicate
heat
sanitize
chime
DAMP ALERT
For loads that contain some items you plan to hang
dry, flat dry or iron, add the damp alert option to
any Auto Dry cycle. A signal will sound when the
load has reached the damp dryness level to remind
you to remove those items to hang dry, dry flat or
iron dry. Open the door, remove those items, close
the door and press the start button to continue dry-
ing the remaining items.
EXTENDED TUMBLE
Select the extended
tumble option if the dried
load might not be removed promptly at the end of
the cycle. The dry load will tumble continuously
without heat for 30 minutes. EHT. TUMBLE: will be
displayed and a chime will sound every 5 minutes
to remind you to remove the dried load.
The wrinkle
release option can be selected with
extended
tumble to increase the amount of time
the load will tumble without heat. Use this combi-
nation if you know it will be more than 45 minutes
before you can remove the load.
Advertisement
Table of Contents
