Table of Contents
Advertisement
Operatin
Instructions
D ness
Level (Auto
The appropriate
dryness level will automatically
be indicated when the cycle is selected.
To change the preset level, press the dryness but-
ton to scroll to the degree of dryness desired.
To protect your fabrics, not all dryness levels are
available with every cycle. If a dryness level is not
appropriate for the cycle, it cannot be selected and
will not be lit by pressing the dryness button.
The dryness level selected for the cycle will be
remembered and recalled each time that cycle is
selected in the future.
Select the normal dryness level for most Auto Dry
cycles.
Occasionally a load may seem too damp or over-
dried at the end of the cycle. To increase drying time
for similar loads in the future, select max. For loads
requiring less drying time, select less.
Select damp for items you wish to partially dry be-
fore hanging or ironing.
D in9
Time (Time
Press the time dry button under the display
window to select 15, 30, 45, 60 or 75 minutes of
drying time. This button only operates with the time
dry cycle. If you press the time dry button while in
an Auto Dry cycle, an error chime signal will sound.
k.
Temperature
{} high
@ medium/high
O medium
{} low
(i}' air
Dryness
max
@ normal
_} less
O damp
Options
i_;
damp
alert
extended
tumble
wrinkle
release
delicate
heat
sanitize
chime
J
!
my
time
control
favorite
dry
lock
start
pause
_ 11_
.................
Advertisement
Table of Contents
