Press The Start Button - Asko T793 Operating Instructions Manual

Operating instructions
Setting the time for the Timed Dry and Air
Fluff programs
You can set the time so that it appears on the
display as Start, End, or the number of min-
utes. This will depend on how you have cho-
sen to display times.
1. Press the program selector until the Time
setting is highlighted.
2. Turn the program selector to select the
time in 15 minute intervals.
3. Press the Start button to start the program
or press the program selector to select
more options.
16
6

Press the Start button

Remaining drying time
An estimate of the remaining drying time
will be shown on the display a few minutes
after the drying program starts. For example,
1:35 means that it will take approximately 1
hour and 35 minutes for the load to dry. If the
Anti Wrinkle option has been selected, the
drum will rotate every minute for 2 hours after
cooling.
Stopping or changing a program
Press and hold the Stop button for three sec-
onds.
Note!
The program will not be affected if you change
the program selector after the program has
started.
Loading or removing laundry
You can stop the tumble dryer after starting
a program by opening the door. Load more
laundry or take out the items you want, close
the door, and press the Start button. A new
estimate of the remaining program time will
be displayed after a few minutes.
Customer Care Center
1-800-898-1879
www.askousa.com