Media Bay; Removing Media Bay Devices - Dell Latitude D620 User Manual

Adding and Replacing Parts: Dell Latitude D620 User's Guide
NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may
damage the connector.
5. Slide the hard drive into the bay until it is fully seated.
6. Replace and tighten the two screws.
7. Use the Operating System CD to install the operating system for your computer (see
Operating System
8. Use the Drivers and Utilities CD to install the drivers and utilities for your computer (see
Drivers and Utilities).

Media Bay

NOTE: If the device security screw is not present, you can remove and install devices while the
computer is running and connected to a docking device (docked).

Removing Media Bay Devices

NOTICE: To prevent damage to devices, store them in a safe, dry place when they are not installed in
the computer. Avoid pressing down on them or placing heavy objects on top of them.
1. If present, remove the device security screw from the bottom of the computer.
2. If the computer is running, double-click the Safely Remove Hardware icon on the taskbar, click the
device you want to eject, and click Stop.
3. Press the device latch release.
file:///S|/Integration%20Specialist/Hardware%20Docu...ation/Kim%20&%20Jay/Dell%20Laptops/D620UG/parts.htm (23 of 24) [12/4/2008 10:54:20 AM]
CD).
Using the
Reinstalling