Preparing for Printing
J
In the [Printer URL] box, enter "http://(printer's address)/printer" as the printer's
address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://(printer's address)/printer" (Internet Ex-
1
plorer 5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
K
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the name of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
L
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
M
Click [OK].
N
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
O
Change the printer name if you want, and then click [Next >].
P
Click [Next >].
Q
Specify whether or not to print a test page, and then click [Next >].
R
Click [Finish].
The printer driver installation starts.
Note
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch "Setup.exe" on the CD-ROM root directory.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
❒ A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.
16