Ricoh C410DN - Aficio SP Color Laser Printer Software Manual page 25

G
Select the name of the printer whose driver you want to install, and then
click [Next >].
H
In the [Available ports:] box, click [Printer Port], and then click [Next >].
I
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
J
Specify whether or not to print a test page, and then click [Finish].
K
On the [Start] menu, point to [Settings], and then click [Printers].
The [Printers] window appears.
L
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties].
M
On the [Details] tab, click [Add Port...].
N
Click [SmartDeviceMonitor] in the [Other] list, and then click [OK].
O
Click [IPP].
P
In the [Printer URL] box, enter "http://(printer's address)/printer" as the printer's
address.
If the server authentification is issued, to enable SSL (a protocol for encrypted
communication), enter "https://(printer's address)/printer" (Internet Ex-
plorer 5.01, or a higher version must be installed).
(example IPv4 address: 192.168.15.16)
http://192.168.15.16/printer
https://192.168.15.16/printer
You can enter "http://(printer's address)/ipp" as the printer's address.
Q
Enter a name for identifying the printer in [IPP Port Name]. Use a name dif-
ferent from the one of any existing port.
If a name is not specified here, the address entered in the [Printer URL] box be-
comes the IPP port name.
R
Click [Detailed Settings] to make necessary settings.
For information about the settings, see SmartDeviceMonitor for Client Help.
S
Click [OK].
T
Check that the selected port is highlighted in [Printer to the following port], and
then click [OK].
U
Restart the computer to complete installation.
Using the SmartDeviceMonitor Port
1
13