Ricoh C410DN - Aficio SP Color Laser Printer Software Manual page 244

Monitoring and Configuring the Printer
Messages
Error at Printer: Red LED
Error in Printer
Error: Address Book
Error: Command Transmission
Error: DIMM Value
Error: Ethernet Board
Error: HDD Board
Error: Memory Switch
Error: Optional Font
Error: Optional RAM
Error: Parallel I/F Board
Error: PDL
Error: USB Interface
6
Error: Wireless Card
Exceed Booklet Stapling Limit
Full: Finisher
Full: Finisher Shift Tray
Full: Finisher Shift Tray 1, 2
Full: Finisher Upper Tray
Full: Hole Punch Receptacle
Full: Waste Toner
Hex Dump Mode
Immed. Trans. not connected
Immediate Transmission Failed
In Use: Copier
In Use: Fax
In Use: Finisher
In Use: Input Tray
In Use: Staple Unit
Independent-supplier Toner
Key Card not inserted
232
Description
An error has occurred.
An error has occurred.
An error has occurred in the data of the ad-
dress book.
An error has occurred in the printer.
A memory error occurred.
An Ethernet board error has occurred.
A hard disk drive board error has occurred.
A memory switch error has occurred.
An error has occurred in the font file of the printer.
An error has occurred in the optional memory unit.
An error has occurred in the parallel interface.
An error has occurred in the page description
language.
An error has occurred in the USB interface.
Wireless card is not inserted during start up,
or the IEEE 802.11b interface unit or the wire-
less card is taken out after start up.
The printing has exceeded the stapling limit of
the booklet finisher.
Finisher tray is full.
Shift tray of Finisher is full.
The shift tray 1 and 2 of Finisher are full.
The upper tray of Finisher is full.
Punch Chip receptacle for hole punch is full.
Waste toner is full.
It is a hex dump mode.
It did not connect directly with the other party
of the transmission.
An error has occurred while transmitting directly.
The copier is being used.
The fax is being used.
Other functions is using Finisher.
Other functions is using the input tray.
Other functions is using the staple unit.
Toner that is not recommended is set.
The printer is waiting for key card to be inserted.