Replacing The Module Cover - Dell Inspiron N5110 Service Manual

1
1 tabs
3 captive screw

Replacing the Module Cover

CAUTION:
this particular Dell computer.
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the module cover with the slots on the computer base
and snap the module cover into place.
3 Tighten the captive screw that secures the module cover to the computer
base.
4 Replace the battery (see "Replacing the Battery" on page 16).
18
Module Cover
2
To avoid damage to the computer, use only the battery designed for
3
2 module cover