1
1
VGA/Power Board
Replacing the VGA/Power Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the connectors on the VGA/Power board with the slots on the base
cover and place it on the base cover.
3 Replace the hinge cover (see "Replacing the Hinge Cover" on page 55).
4 Follow the instructions from step 6 to step 17 in "Replacing the System
Board" on page 67.
5 Replace the display assembly (see "Replacing the Display Assembly" on
page 43).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
86
VGA/Power Board
Before turning on the computer, replace all screws and ensure that no