Replacing the I/O Board
1 Slide the connectors on the I/O board into the slots on the computer base
and place the I/O board on the computer base.
2 Replace the two screws that secure the I/O board to the computer base.
3 Replace the Mini-Card(s) (see "Replacing the Mini-Card(s)" on page 39).
4 Replace the hinge cover (see "Replacing the Hinge Cover" on page 55).
5 Follow the instructions from step 6 to step 16 in "Replacing the System
Board" on page 67.
6 Replace the display assembly (see "Replacing the Display Assembly" on
stray screws remain inside the computer. Failure to do so may result in damage to
Before turning on the computer, replace all screws and ensure that no