Table 22. Removal steps of keyboard (continued)
7
M2 × 2 mm, wafer-head, nylon-coated (1)
When installing the keyboard, do as follows:
Table 23. Installation of the keyboard
1. Attach the connectors.
2. Attach the keyboard so that the keyboard edges are under the frame as shown in this figure.
3. To make sure that the front side of the keyboard is housed firmly, gently press the keys with your thumbs
and try to slide the keyboard toward you.
4. Secure the keyboard by tightening the screws from the bottom side of the computer.
0.181 Nm
Silver
(1.85 kgfcm)
.
Chapter 8
Removing and replacing a FRU
73