1060 Fan Assembly - Lenovo 0319A25 Hardware Maintenance Manual

Table 12. Removal steps of DIMM
Note: If only one DIMM is used on the computer you are servicing, the card must be installed in SLOT-0 (
slot), but not in SLOT-1 (
When installing: Insert the notched end of the DIMM into the socket. Press the DIMM firmly, and pivot it until it
snaps into the place. Make sure that it is firmly fixed in the slot and does not move easily.

1060 Fan assembly

For access, remove these FRUs in order:
• "1010 Battery pack" on page 54
• "1030 Thermal cover" on page 55
Attention:
• Do not handle the fan roughly. Improper handling of the fan can cause distortion or deformation and
imperfect contact with components.
• Do not touch or apply any excessive force to the fan motor. It might cause damage to the fan assembly or
the computer to mulfunction.
58
Hardware Maintenance Manual
b
: upper slot).
b
a
a
: lower