Firmware version:
Description
These release notes are for the firmware indicated above, which adds improvements and corrects
issues found during use and additional qualification testing after initial product release.
Firmware can be installed from any computer running a supported operating system with an Ethernet
connection to the storage array system. For supported operating systems, see
Installation procedures vary, depending on connection environment and user preference. For details,
see
Installation
Update recommendation
Supersedes
Product models
HP StorageWorks MSA2000 3.5-inch LFF Drive Enclosure
Operating systems
Operating systems supported for use with the HP StorageWorks MSA2000 disk enclosure and the
binary firmware package:
•
Microsoft Windows Server 2008 and 2008 R2 IA32, x64, IA64 (Standard, Enterprise, Datacenter)
•
Microsoft Windows Server 2008 x64 Hyper-V
•
Microsoft Windows 2003 and 2003 R2 IA32, x64, IA64
•
Red Hat Enterprise Linux 4 x86, x64, IA64
•
Red Hat Enterprise Linux 5 x86, x64, IA64
•
SuSE Linux Enterprise Server 10 x86, x64, IA64
•
VMware ESX 3.0.1, 3.0.2, 3.5, 4.0 Editions
•
Citrix XenServer HP Enterprise Edition
•
Red Hat Virtualization
•
HP-UX 11i V3 Integrity, HP9000
•
HP-UX 11i V2 Integrity, HP9000
•
OpenVMS 8.3. OpenVMS 8.3-1H1
Operating systems supported for use with the Smart Component firmware package:
•
Microsoft Windows Server 2003 x86, x64, IA64
•
Microsoft Windows Server 2008 x86, x64, IA64
•
Red Hat Enterprise Linux 4 x86, x64, IA64
•
Red Hat Enterprise Linux 5 x86, x64, IA64
•
SuSE Linux Enterprise Server 10 x86, x64, IA64
HP StorageWorks MSA2000 3.5-inch LFF Drive Enclosure Firmware Release Notes
O300B28
instructions.
Recommended
All previously released firmware versions.
Operating
systems.
3
Need help?
Do you have a question about the AJ750A - StorageWorks Modular Smart Array 2000 Dual I/O Storage Enclosure and is the answer not in the manual?