Advertisement
Smart Component installation instructions for Linux environments
1.
Place the downloaded firmware package in a temporary directory.
2.
Open a Linux command console.
3.
From the directory containing the downloaded file, enable execute access by entering chmod
+x CPxxxxxx.scexe, where CPxxxxxx.scexe represents the downloaded file.
4.
Execute the Smart Component by entering a command similar to the following: ./
CPxxxxxx.scexe --target <ip_address> --user <username> --passwd
<password>
NOTE:
Use the -e or -f option when flashing a device, even if it is up to date.
Use the -g option when downgrading.
For details on supported command options, see the online help by executing the command
./CPxxxxxx.scexe or ./CPxxxxxx.scexe -h.
If the user name or password contains an exclamation mark (!), enclose the string in
single quotes or enter a backslash (\) before the exclamation point. For example,
'!manage' or \!manage.
5.
Follow onscreen instructions.
NOTE:
When prompted for logon information, enter credentials for an account with management
access rights.
6
Advertisement
