Setting DIP Switches
Switch
1 Full Bus
2 JBOD
3 Bus Reset: Pwr Fail
4 Address High
5 Bus Reset: Hot Swap
76
ON = |
Creates a single bus of 10
addresses
Sets disk-to-host configuration
Automatically resets the bus when
power fails
Assigns high SCSI addresses
(8-12) to disks on split bus
Automatically resets the bus when
a disk is removed or inserted
OFF = 0
Splits the bus into two buses, 5
addresses each
For use with array product
Lets the host detect change and
determine action
Assigns low SCSI addresses
(0-3, 13) to disks on split bus
Lets the host detect change and
determine action