HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure User Manual page 21

Modular smart array enclosure
Hide thumbs Also See for 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure:
Table of Contents

Advertisement

2.
Press the latch and slide it to the right to disengage the lever (1), and then open the lever (2).
Make sure that the lever is in the fully opened position before inserting the drive into the bay.
3.
Slide the disk drive into the bay (1), pressing firmly on the drive to seat it. Close the lever (2),
pressing firmly until it locks in place
IMPORTANT:
When the drive is inserted in an operational enclosure, the drive LEDs flash for 2 seconds
to indicate that the drive is seated properly and receiving power.
4.
Determine the status of the disk drive (see
IMPORTANT:
For proper airflow and cooling, a blank must remain installed in all unused drive bays.
Hard drive LED
combinations).
70 Modular Smart Array User Guide
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

70Storageworksv 70 modular smart array

Table of Contents