Installing The 7-Segment Display Board; Verifying Component Replacement - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Maintenance And Service Manual

Pull out the pin to release the board (1).
4.
Put your finger inside the slot to slide the board out of the chassis (2).
5.

Installing the 7-segment display board

To install the board, reverse the removal procedure:
Slide the board into the chassis and insert the pin to secure it.
1.
Install the access panel.
2.
Insert the enclosure into the rack and power up the enclosure.
3.

Verifying component replacement

After replacing the 7-segment display board, check the 7-segment display board LED display to verify the
board is operating normally.
Removal and replacement procedures 42