Caution; Installing The Power Uid Module; Verifying Component Replacement - HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage Enclosure Maintenance And Service Manual

Disconnect the cable from the midplane (1).
4.
Remove the T-15 screw securing the module to the chassis (2) and lift the module out of the chassis
5.
(3).

CAUTION:

Be careful not to accidentally drop the screw into the chassis when removing it from the module.

Installing the power UID module

To install the power UID module, reverse the removal procedure:
Insert the module into the chassis and secure it with a T-15 screw.
1.
Connect the cable to the midplane.
2.
Install the access panel.
3.
Insert the enclosure into the rack and power up the enclosure.
4.

Verifying component replacement

After replacing the power UID module, check the power UID module status LED.
Removal and replacement procedures 40