Turning The Beeper On/Off; Selecting Nmea Message; Selecting The Baud Rate - Magellan Meridian Platinum User Manual

Reference
Turning the Beeper On/Off — Allows you to select which actions will
cause the beeper to sound. You can choose from Off, Keys Only
(pressing a key causes a beep), Alarms Only (when an alarm is activated)
or Keys & Alarms.
From
Screen
Default: Keys & Alarms
Selecting NMEA Message — Allows the selection of the NMEA message
that will be output from the Meridian. Choices are Off, V1.5 APA,
V1.5 XTE or V2.1 GSA. Your choice will be dependent upon what
message the device you are connecting to needs to receive.
From
Screen
Default: Off
Selecting the Baud Rate — Enables you to set the baud rate of the data
being sent out from the Meridian's output port. The baud rate sent out
must match the baud rate that the receiving device is set for. You can
choose from 1200 baud, 4800 baud, 9600 baud, 19200 baud, 57600
baud or 115200 baud.
From
Screen
Default: 4800 Baud
64
Highlight
MENU
Any
Setup
Select
ENTER
Beeper
Options
Highlight
MENU
Any
Setup
Select
ENTER
NMEA
Message
Highlight
MENU
Any
Setup
Select
ENTER
Baud
Rate
Highlight
ENTER
Beeper
Highlight
ENTER
NMEA
Highlight
ENTER
Baud Rate
Magellan Meridian GPS Receiver
ENTER
ENTER
ENTER