Maintenance; Cleaning; Troubleshooting - IDW G-7 Instruction Manual

Instructional Manual

MAINTENANCE

Cleaning Shutdown Questions and Answers

Cleaning

•
Unplug the cooler before cleaning.
•
Use a soft cloth or sponge with water or soap (non-corrosive mild detergent), while cleaning. After
cleaning, wipe the cooler using dry cloth to keep the cooler from rusting.
•
Do not spray water on the cooler, and do not use hard or steel brushes to clean the cooler.
•
Clean the inside cabinet of the cooler with a clean, damp cloth or with mild soap.
•
Do not use organic solvents, boiling water, washing powder or acid while cleaning.
If cooler's power will be off for a long period of time, unplug it, clean as instructed above, and keep
door open until dry.

Troubleshooting

The following are not Malfunctions:
Issues
Liquid flowing noise within cooler
Refrigeration system is shutdown for
longer periods of time while temperature
inside is still very low.
Condensation on glass door
1
This refrigerator has been designed and manufactured according to National standards.
2
If there are any questions during use, refer to this operation manual to help troubleshoot problems.
3
When disposing of the cooler, please remove the door and lock to avoid children accidentally becoming
trapped inside the cooler.
After Sales Service
Any product has the possibility of malfunction. Please observe the cooler's operation and any changes to
product being stored. If there are any abnormal cases, refer to the following table. If there is still no change
after following the instructions, please inform our service center in a timely manner to avoid a further loss of
the unit.
Solutions
This liquid is the sound of the cooling agent flowing through
the pipes.
This refrigerator has a strong level of heat preservation and
can maintain a relatively ambient temperature.
This may be due to a high indoor humidity or a low inside
temperature value may be set. Wipe the door dry with a towel.
10