Table of Contents
Advertisement
Instruction Manual
STARTUP, OPERATION AND TEMPERATURE ADJUSTMENT
Operation
• Prior to stocking cooler with product, it should
be operated empty for half an hour.
Temperature Adjustment
• G-10f/GCG-10f performance testing
position of the thermostat is around 4-6.
• Component shown at the left
functions as a secondary power
source for low voltage items such as
signs.
REPAIR AND MAINTENANCE FOR REFRIGERATION DRAWER
* A CERTIFIED TECHNICIAN IS REQUIRED TO REPAIR ALL
REFRIGERATION COMPONENTS FOR WARRANTY PURPOSES.
For convenient repair, the refrigeration components (compressor,
evaporator, condenser, evaporation fan, condensation fan and filter) are
designed using a split system; any component can be easily replaced.
Replacement procedure is as follows:
1
Unplug the unit.
2
Remove the screws from the front grill, and then remove the grill.
3
Unplug all connections and terminals that are in need of repair.
4
Using a screwdriver, remove the (3) screws
from the refrigeration drawer base plate.
5
Slide the Refrigeration Drawer out to easily access
refrigeration components. Remove the component to replace or
repair.
6
After repair, re-install all parts using the reverse procedure.
Lit Door "Logo"
Switch
Operation
•
For GCG-10f
coolers only.
The light switch
located at the bottom
left hand side on the rear of the
cabinet is the ON/OFF switch for the
Lit logo located on the door of cooler.
9
Hide quick links:
Advertisement
Table of Contents
